Click on images for larger view

ESS Innerzone 1 Goggles. The NFPA-compliant ESS Innerzone 1 Goggles feature a unique semi-permanent two-piece strap and mounting bracket system that functions well with all major brands of structural fire helmets. Thumb screws secure each strap onto the mounting brackets, which attach to a helmet brim with no drilling required.

The ESS Innerzone 1 Goggle system keeps the goggles on hand at all times, and allows them to be stowed on either the front or rear of the helmet. This configuration is recommended for use without face shields.

The patented ESS Speed-Clip strap system makes adjusting the Innerzone straps quick and easy, even with gloves on. The full-perimeter ventilation and filtration system minimizes lens fogging and filters airborne particles, dust, and debris. The roomy ESS Striker frame is designed to fit over most eyeglasses.

Thick, 2.6mm polycarbonate lenses offer maximum impact protection and optical clarity. These lenses feature ESS' advanced ClearZone FlowCoat lens treatments, which provide an optimal combination of anti-scratch coatings on the outside of the lens and anti-fog coatings on the inside.

All ESS Innerzone goggles are certified to meet the NFPA 1971-2007 structural fire equipment performance requirements, including the 500°F for 5-minute oven test. They are also U.S. Federal OSHA compliant, exceed the requirements of ANSI Z87.1-2010, and are considered Primary Eye Protection by NFPA 1500. All ESS Innerzone lenses provide 100% UVA/UVB Protection.

ESS Innerzone 1 Goggles Features:

• All goggle components are extremely heat resistant
• 2-piece Nomex strap & Semi-permanent, thumb-screw mounting system
• Advanced ESS ClearZone FlowCoat lenses eliminate fog inside & prevent scratches outside
• Full-perimeter ventilation & filtration system
• Minimizes lens fogging & filters smoke & airborne particles
• Patented Speed-Clip system facilitates quick strap adjustment
• Interchangeable 2.6mm high-impact Polycarbonate lenses
• Distortion-free optics & 100% UVA/UVB protection
• Roomy frame fits over most prescription eyewear

ESS Innerzone 1 Goggles Specs:

• Compliant With: NFPA 1971-2007 Edition
• ANSI Z87.1-2010
• CE EN 166
• U.S. Federal OSHA

ESS Innerzone 1 Goggles Kit Includes:

• 1 Black Innerzone 1 Goggle Frame with Open-Cell Vent Foam
• A Two-piece Strap with Grommets and Black Speed-Clip Strap Outriggers
• 2 Semi-Permanent Helmet Mounting Brackets
• 1 Clear NFPA-Compliant Innerzone Lens
• 1 User's Guide
• 1 ESS Sticker